Subscribe to our YouTube channel ×

    FirePro M6000 vs GeForce GTX 1050 Ti

    If you are going to buy a new graphics card and are choosing between FirePro M6000 and GeForce GTX 1050 Ti, there are a couple of things to consider. Cards with more VRAM in general perform better and allow you to play on higher graphics settings. Size also makes a difference. A model with a large heatsink can occupy up to three expansion slots on a motherboard. Be sure you have enough room in your PC case. When comparing GPUs with different architectures, more processing cores and even higher TFLOPS will not always translate to better performance. To help you decide which GPU you need, we have measured frame rates in a number of popular games. For more on how the FirePro M6000 stacks up against GeForce GTX 1050 Ti, check out specs charts below.
    FirePro M6000 Check Price
    GeForce GTX 1050 Ti Check Price

    FirePro M6000 is a Laptop Graphics Card

    Note: FirePro M6000 is only used in laptop graphics. It has lower GPU clock speed compared to the desktop variant, which results in lower power consumption, but also 10-30% lower gaming performance. Check available laptop models with FirePro M6000 here:

    FirePro M6000 Laptops

    Main Specs

      FirePro M6000 GeForce GTX 1050 Ti
    Power consumption (TDP) 43 Watt 75 Watt
    Interface MXM-B (3.0) PCIe 3.0 x16
    Supplementary power connectors None None
    Memory type GDDR5 GDDR5
    Maximum RAM amount 2 GB 4 GB
    Display Connectors No outputs 1x DVI, 1x HDMI, 1x DisplayPort
      Check Price Check Price
    • GeForce GTX 1050 Ti has 74% more power consumption, than FirePro M6000.
    • FirePro M6000 is connected by MXM-B (3.0), and GeForce GTX 1050 Ti uses PCIe 3.0 x16 interface.
    • GeForce GTX 1050 Ti has 2 GB more memory, than FirePro M6000.
    • FirePro M6000 is used in Mobile workstations, and GeForce GTX 1050 Ti - in Desktops.
    • FirePro M6000 is build with GCN architecture, and GeForce GTX 1050 Ti - with Pascal.
    • Core clock speed of GeForce GTX 1050 Ti is 541 MHz higher, than FirePro M6000.
    • FirePro M6000 is manufactured by 28 nm process technology, and GeForce GTX 1050 Ti - by 16 nm process technology.
    • Memory clock speed of GeForce GTX 1050 Ti is 2508 MHz higher, than FirePro M6000.

    Game benchmarks

    high / 1080p 8−9 35−40
    ultra / 1080p 5−6 21−24
    QHD / 1440p 0−1 16−18
    4K / 2160p − 10−11
    low / 720p 20−22 60−65
    medium / 1080p 10−12 40−45
    The average gaming FPS of GeForce GTX 1050 Ti in Assassin's Creed Odyssey is 272% more, than FirePro M6000.

    Full Specs

      FirePro M6000 GeForce GTX 1050 Ti
    Architecture GCN Pascal
    Code name Heathrow N17P-G1
    Type Mobile workstation Desktop
    Release date 1 July 2012 25 October 2016
    Pipelines 640 768
    Core clock speed 750 MHz 1291 MHz
    Boost Clock 1392 MHz
    Transistor count 1,500 million 3,300 million
    Manufacturing process technology 28 nm 16 nm
    Texture fill rate 32.00 66.82
    Floating-point performance 1,024 gflops 2,138 gflops
    Length 145 mm
    Memory bus width 128 Bit 128 Bit
    Memory clock speed 4500 MHz 7008 MHz
    Memory bandwidth 72 GB/s 112 GB/s
    Shared memory - -
    G-SYNC support +
    VR Ready +
    DirectX 12 (11_1) 12 (12_1)
    Shader Model 5.1 6.4
    OpenGL 4.6 4.6
    OpenCL 1.2 1.2
    Vulkan 1.2.131 1.2.131
    CUDA +
    Monero / XMR (CryptoNight) 0.3 kh/s
    CUDA cores 768
    Bus support n/a
    Bitcoin / BTC (SHA256) 326 Mh/s
    Laptop size medium sized
    Decred / DCR (Decred) 1.01 Gh/s
    Ethereum / ETH (DaggerHashimoto) 12.62 Mh/s
    Zcash / ZEC (Equihash) 156.48 Sol/s
    Form factor MXM-B
    StereoOutput3D +
      Check Price Check Price

    Similar compares