FirePro S7150 vs FirePro V5800

If you are going to buy a new graphics card and are choosing between FirePro S7150 and FirePro V5800, there are a couple of things to consider. Cards with more VRAM in general perform better and allow you to play on higher graphics settings. Size also makes a difference. A model with a large heatsink can occupy up to three expansion slots on a motherboard. Be sure you have enough room in your PC case. When comparing GPUs with different architectures, more processing cores and even higher TFLOPS will not always translate to better performance. To help you decide which GPU you need, we have measured frame rates in a number of popular games. For more on how the FirePro S7150 stacks up against FirePro V5800, check out specs charts below.
FirePro S7150
FirePro V5800

Main Specs

  FirePro S7150 FirePro V5800
Power consumption (TDP) 150 Watt 74 Watt
Interface PCIe 3.0 x16 PCIe 2.0 x16
Supplementary power connectors 1x 6-pin None
Memory type GDDR5 GDDR5
Maximum RAM amount 8 GB 1 GB
Display Connectors No outputs 1x DVI, 2x DisplayPort
 
  • FirePro S7150 has 102% more power consumption, than FirePro V5800.
  • FirePro S7150 is connected by PCIe 3.0 x16, and FirePro V5800 uses PCIe 2.0 x16 interface.
  • FirePro S7150 has 7 GB more memory, than FirePro V5800.
  • Both cards are used in Desktops.
  • FirePro S7150 is build with GCN 3.0 architecture, and FirePro V5800 - with TeraScale 2.
  • Core clock speed of FirePro S7150 is 230 MHz higher, than FirePro V5800.
  • FirePro S7150 is manufactured by 28 nm process technology, and FirePro V5800 - by 40 nm process technology.
  • FirePro S7150 is 12 mm longer, than FirePro V5800.
  • Memory clock speed of FirePro S7150 is 1000 MHz higher, than FirePro V5800.

Game benchmarks

high / 1080p 35−40 6−7
ultra / 1080p 21−24 4−5
QHD / 1440p 16−18 0−1
4K / 2160p 10−11
low / 720p 60−65 16−18
medium / 1080p 40−45 7−8
The average gaming FPS of FirePro S7150 in Assassin's Creed Odyssey is 412% more, than FirePro V5800.

Full Specs

  FirePro S7150 FirePro V5800
Architecture GCN 3.0 TeraScale 2
Code name Tonga Juniper
Type Workstation Workstation
Release date 1 February 2016 26 April 2010
Pipelines 2048 800
Core clock speed 920 MHz 690 MHz
Transistor count 5,000 million 1,040 million
Manufacturing process technology 28 nm 40 nm
Texture fill rate 117.8 27.60
Floating-point performance 3,763 gflops 1,104.0 gflops
Length 241 mm 229 mm
Memory bus width 256 Bit 128 Bit
Memory clock speed 5000 MHz 4000 MHz
Memory bandwidth 160.0 GB/s 64 GB/s
DirectX 12 (12_0) 11.2 (11_0)
Shader Model 6.3 5.0
OpenGL 4.6 4.4
OpenCL 2.0 1.2
Vulkan 1.2.131 N/A