FirePro S7150 vs Radeon Pro 570

If you are going to buy a new graphics card and are choosing between FirePro S7150 and Radeon Pro 570, there are a couple of things to consider. Cards with more VRAM in general perform better and allow you to play on higher graphics settings. Size also makes a difference. A model with a large heatsink can occupy up to three expansion slots on a motherboard. Be sure you have enough room in your PC case. When comparing GPUs with different architectures, more processing cores and even higher TFLOPS will not always translate to better performance. To help you decide which GPU you need, we have measured frame rates in a number of popular games. For more on how the FirePro S7150 stacks up against Radeon Pro 570, check out specs charts below.
FirePro S7150
Radeon Pro 570

Main Specs

  FirePro S7150 Radeon Pro 570
Power consumption (TDP) 150 Watt 120 Watt
Interface PCIe 3.0 x16 PCIe 3.0 x16
Supplementary power connectors 1x 6-pin None
Memory type GDDR5 GDDR5
Maximum RAM amount 8 GB 4 GB
Display Connectors No outputs No outputs
 
  • FirePro S7150 has 25% more power consumption, than Radeon Pro 570.
  • Both video cards are using PCIe 3.0 x16 interface connection to a motherboard.
  • FirePro S7150 has 4 GB more memory, than Radeon Pro 570.
  • Both cards are used in Desktops.
  • FirePro S7150 is build with GCN 3.0 architecture, and Radeon Pro 570 - with GCN 4.0.
  • Core clock speed of Radeon Pro 570 is 80 MHz higher, than FirePro S7150.
  • FirePro S7150 is manufactured by 28 nm process technology, and Radeon Pro 570 - by 14 nm process technology.
  • Both graphics cards are the same length of 241 mm.
  • Memory clock speed of Radeon Pro 570 is 1780 MHz higher, than FirePro S7150.

Game benchmarks

high / 1080p 35−40 35−40
ultra / 1080p 21−24 21−24
QHD / 1440p 16−18 16−18
4K / 2160p 10−11 10−11
low / 720p 60−65 60−65
medium / 1080p 40−45 40−45
FirePro S7150 and Radeon Pro 570 have the same average FPS in Assassin's Creed Odyssey.

Full Specs

  FirePro S7150 Radeon Pro 570
Architecture GCN 3.0 GCN 4.0
Code name Tonga Polaris 20
Type Workstation Workstation
Release date 1 February 2016 5 June 2017
Pipelines 2048 1792
Core clock speed 920 MHz 1000 MHz
Boost Clock 1105 MHz
Transistor count 5,000 million 5,700 million
Manufacturing process technology 28 nm 14 nm
Texture fill rate 117.8 123.8
Floating-point performance 3,763 gflops 3,584 gflops
Length 241 mm 241 mm
Memory bus width 256 Bit 256 Bit
Memory clock speed 5000 MHz 6780 MHz
Memory bandwidth 160.0 GB/s 217.0 GB/s
DirectX 12 (12_0) 12 (12_0)
Shader Model 6.3 6.4
OpenGL 4.6 4.6
OpenCL 2.0 2.0
Vulkan 1.2.131 1.2.131