FirePro S10000 vs Quadro 2000D

If you are going to buy a new graphics card and are choosing between FirePro S10000 and Quadro 2000D, there are a couple of things to consider. Cards with more VRAM in general perform better and allow you to play on higher graphics settings. Size also makes a difference. A model with a large heatsink can occupy up to three expansion slots on a motherboard. Be sure you have enough room in your PC case. When comparing GPUs with different architectures, more processing cores and even higher TFLOPS will not always translate to better performance. To help you decide which GPU you need, we have measured frame rates in a number of popular games. For more on how the FirePro S10000 stacks up against Quadro 2000D, check out specs charts below.
FirePro S10000
Quadro 2000D

Main Specs

  FirePro S10000 Quadro 2000D
Power consumption (TDP) 750 Watt 62 Watt
Interface PCIe 3.0 x16 PCIe 2.0 x16
Supplementary power connectors 2x 8-pin None
Memory type GDDR5 GDDR5
Maximum RAM amount 6 GB 1 GB
Display Connectors 1x DVI, 4x mini-DisplayPort 2x DVI
 
  • FirePro S10000 has 1109% more power consumption, than Quadro 2000D.
  • FirePro S10000 is connected by PCIe 3.0 x16, and Quadro 2000D uses PCIe 2.0 x16 interface.
  • FirePro S10000 has 5 GB more memory, than Quadro 2000D.
  • Both cards are used in Desktops.
  • FirePro S10000 is build with GCN 1.0 architecture, and Quadro 2000D - with Fermi.
  • Core clock speed of FirePro S10000 is 200 MHz higher, than Quadro 2000D.
  • FirePro S10000 is manufactured by 28 nm process technology, and Quadro 2000D - by 40 nm process technology.
  • FirePro S10000 is 127 mm longer, than Quadro 2000D.
  • Memory clock speed of FirePro S10000 is 2400 MHz higher, than Quadro 2000D.

Game benchmarks

high / 1080p 35−40 2−3
ultra / 1080p 21−24 0−1
QHD / 1440p 16−18 0−1
4K / 2160p 10−11
low / 720p 60−65 12−14
medium / 1080p 40−45 3−4
The average gaming FPS of FirePro S10000 in Assassin's Creed Odyssey is 683% more, than Quadro 2000D.

Full Specs

  FirePro S10000 Quadro 2000D
Architecture GCN 1.0 Fermi
Code name Tahiti GF106
Type Workstation Workstation
Release date 12 November 2012 5 October 2011
Pipelines 4096 192
Core clock speed 825 MHz 625 MHz
Boost Clock 950 MHz
Transistor count 4,313 million 1,170 million
Manufacturing process technology 28 nm 40 nm
Texture fill rate 106.4 20.00
Floating-point performance 2x 3,405 gflops 480.0 gflops
Length 305 mm 178 mm
Memory bus width 384 Bit 128 Bit
Memory clock speed 5000 MHz 2600 MHz
Memory bandwidth 480 GB/s 41.6 GB/s
DirectX 12 (11_1) 12 (11_0)
Shader Model 5.1 5.1
OpenGL 4.6 4.6
OpenCL 1.2 1.1
Vulkan 1.2.131 N/A
CUDA 2.1
Bus support PCIe 3.0
Bitcoin / BTC (SHA256) 383 Mh/s 31 Mh/s
Form factor full height / full length
Dual-link DVI support +