Subscribe to our YouTube channel ×

    GeForce GTX 1050 vs Radeon R7 M270

    When comparing GeForce GTX 1050 and Radeon R7 M270, we look primarily at benchmarks and game tests. But it is not only about the numbers. Often you can find third-party models with higher clock speeds, better cooling, or a customizable RGB lighting. Not all of them will have all the features you need. Another thing to consider is the port selection. Most graphics cards have at least one DisplayPort and HDMI interface, but some monitors require DVI. Before you buy, check the TDP of the graphics card - this characteristic will help you estimate the consumption of the graphics card. You may even have to upgrade your PSU to meet its requirements. An important factor when choosing between GeForce GTX 1050 and Radeon R7 M270 is the price. Does the additional cost justify the performance hit? Our comparison should help you make the right decision.
    GeForce GTX 1050 Check Price
    Radeon R7 M270 Check Price

    Radeon R7 M270 is a Laptop Graphics Card

    Note: Radeon R7 M270 is only used in laptop graphics. It has lower GPU clock speed compared to the desktop variant, which results in lower power consumption, but also 10-30% lower gaming performance. Check available laptop models with Radeon R7 M270 here:

    Radeon R7 M270 Laptops

    Main Specs

      GeForce GTX 1050 Radeon R7 M270
    Power consumption (TDP) 75 Watt
    Interface PCIe 3.0 x16 PCIe 3.0 x8
    Supplementary power connectors None
    Memory type GDDR5 Not Listed
    Maximum RAM amount 4 GB
    Display Connectors 1x DVI, 1x HDMI, 1x DisplayPort No outputs
    Recommended system power (PSU) 300 Watt
      Check Price Check Price
    • GeForce GTX 1050 is connected by PCIe 3.0 x16, and Radeon R7 M270 uses PCIe 3.0 x8 interface.
    • GeForce GTX 1050 is used in Desktops, and Radeon R7 M270 - in Laptops.
    • GeForce GTX 1050 is build with Pascal architecture, and Radeon R7 M270 - with GCN.
    • Core clock speed of GeForce GTX 1050 is 465 MHz higher, than Radeon R7 M270.
    • GeForce GTX 1050 is manufactured by 14 nm process technology, and Radeon R7 M270 - by 28 nm process technology.

    Game benchmarks

    high / 1080p 35−40 0−1
    ultra / 1080p 21−24 −
    QHD / 1440p 16−18 0−1
    4K / 2160p 10−11 −
    low / 720p 60−65 1−2
    medium / 1080p 40−45 0−1
    The average gaming FPS of GeForce GTX 1050 in Assassin's Creed Odyssey is 6100% more, than Radeon R7 M270.

    Full Specs

      GeForce GTX 1050 Radeon R7 M270
    Architecture Pascal GCN
    Code name N17P-G1 Opal XT / Mars
    Type Desktop Laptop
    Release date 25 October 2016 7 January 2014
    Pipelines 640 384
    Core clock speed 1290 MHz 825 MHz
    Boost Clock 1392 MHz
    Transistor count 3,300 million 950 million
    Manufacturing process technology 14 nm 28 nm
    Texture fill rate 58.20 19.80
    Floating-point performance 1,862 gflops 633.6 gflops
    Length 5.7" (14.5 cm)
    Memory bus width 128 Bit
    Memory clock speed 7008 MHz
    Memory bandwidth 112 GB/s 28.8 GB/s
    Shared memory - -
    G-SYNC support +
    VR Ready +
    DirectX 12 (12_1)
    Shader Model 6.4 5.1
    OpenGL 4.5 4.4
    OpenCL 1.2 Not Listed
    Vulkan 1.2.131
    CUDA +
    Monero / XMR (CryptoNight) 0.3 kh/s
    FreeSync +
    CUDA cores 640
    Bus support PCIe 3.0 PCIe 3.0
    Height 4.38" (11.1 cm)
    Multi monitor support +
    HDCP 2.2
    Bitcoin / BTC (SHA256) 279 Mh/s
    Laptop size medium sized
    HD3D +
    PowerTune +
    DualGraphics +
    ZeroCore +
    Switchable graphics +
    Mantle +
    Decred / DCR (Decred) 0.85 Gh/s
    Zcash / ZEC (Equihash) 143.76 Sol/s
    Width 2-slot
    GameStream +
    GPU Boost 3.0
    SLI -
      Check Price Check Price

    Similar compares