FirePro S9050 vs Radeon R7 M350

When comparing FirePro S9050 and Radeon R7 M350, we look primarily at benchmarks and game tests. But it is not only about the numbers. Often you can find third-party models with higher clock speeds, better cooling, or a customizable RGB lighting. Not all of them will have all the features you need. Another thing to consider is the port selection. Most graphics cards have at least one DisplayPort and HDMI interface, but some monitors require DVI. Before you buy, check the TDP of the graphics card - this characteristic will help you estimate the consumption of the graphics card. You may even have to upgrade your PSU to meet its requirements. An important factor when choosing between FirePro S9050 and Radeon R7 M350 is the price. Does the additional cost justify the performance hit? Our comparison should help you make the right decision.

Main Specs

  FirePro S9050 Radeon R7 M350
Power consumption (TDP) 225 Watt 35 Watt
Interface PCIe 3.0 x16 PCIe 3.0 x8
Supplementary power connectors 1x 8-pin
Memory type GDDR5 DDR3
Maximum RAM amount 12 GB 4 GB
Display Connectors 1x DisplayPort No outputs
  Check Price
  • FirePro S9050 has 542% more power consumption, than Radeon R7 M350.
  • FirePro S9050 is connected by PCIe 3.0 x16, and Radeon R7 M350 uses PCIe 3.0 x8 interface.
  • FirePro S9050 has 8 GB more memory, than Radeon R7 M350.
  • Both cards are used in Desktops.
  • FirePro S9050 and Radeon R7 M350 are build with GCN 1.0 architecture.
  • Core clock speed of FirePro S9050 is 175 MHz higher, than Radeon R7 M350.
  • FirePro S9050 and Radeon R7 M350 are manufactured by 28 nm process technology.
  • Memory clock speed of FirePro S9050 is 4500 MHz higher, than Radeon R7 M350.

Game benchmarks

high / 1080p 20−22 2−3
ultra / 1080p 12−14 0−1
QHD / 1440p 6−7 0−1
4K / 2160p 5−6
low / 720p 35−40 12−14
medium / 1080p 24−27 3−4
The average gaming FPS of FirePro S9050 in Assassin's Creed Odyssey is 366% more, than Radeon R7 M350.

Full Specs

  FirePro S9050 Radeon R7 M350
Architecture GCN 1.0 GCN 1.0
Code name Tahiti Opal
Type Workstation Desktop
Release date 7 August 2014 5 May 2015
Pipelines 1792 384
Core clock speed 900 MHz 725 MHz
Boost Clock 825 MHz
Transistor count 4,313 million 950 million
Manufacturing process technology 28 nm 28 nm
Texture fill rate 100.8 19.80
Floating-point performance 3,226 gflops 779.5 gflops
Length 254 mm
Memory bus width 384 Bit 128 Bit
Memory clock speed 5500 MHz 1000 MHz
Memory bandwidth 264 GB/s 14.4 GB/s
DirectX 12 (11_1)
Shader Model 5.1 5.1
OpenGL 4.6 4.4
OpenCL 1.2 Not Listed
Vulkan 1.2.131
FreeSync +
Bus support PCIe 3.0 PCIe 3.0
Eyefinity +
HD3D +
PowerTune +
DualGraphics +
ZeroCore +
Switchable graphics +
Mantle +
Compute units 6
Form factor full height / full length
  Check Price